DIY Anti Static Electricity Stick

This is DIY anti static electricity stick
Materials : Two 10 Mega ohm resistors, screws, thick straw(or Ball point pen body). Neon lamp is optional.
Escape from electrostatic shock at low cost.

22 Responses to "DIY Anti Static Electricity Stick"

zoomy500 says:

November 23, 2013 at 11:49 am

First!

Reply
Lechoslowianin says:

November 23, 2013 at 1:35 pm

Twój dom jest pełen pozytywnej energii.

Reply
Loco Llama says:

November 23, 2013 at 2:41 pm

I guess its less painful as discharging with your finger.

Reply
MrSlehofer says:

November 23, 2013 at 3:10 pm

Exelent invention!

Reply
JoeKwonxD says:

November 24, 2013 at 8:06 am

Nice! This is going to be really nice to have since it’s becoming winter!

Reply
Al Revés says:

November 24, 2013 at 10:26 am

Hi, long time viewer, first time commenter.
Could you make a suit with these in, and obsorb the shock of a tazer gun?

Reply
unsp0k3nst0ry says:

November 24, 2013 at 4:23 pm

Hahaha, just remember something..that my sister get whoaa, WTF with this
door knob. Where is it really came from ? (the static electric on my
sister’s door knob) ?

Reply
Daniel Daniel says:

March 3, 2014 at 10:41 am

Hi Thomas! Can you please respond and tell me if I can make the same thing
but with more rezistors that have less rezistance? I went to the store but
they didn’t have 10Mohm.

Reply
ninguno says:

July 29, 2014 at 3:30 am

Hi, Tomas Good Job. What is the little crazy ball in the plastic tube?
Regards

Reply
Jay H says:

December 21, 2014 at 4:42 am

If you soldered resistors onto doorknobs, would it consume the static
electricity? Could you also just keep that device you made, in your pocket
and it would consume the static buildup on you?

Reply
Mark Lawrence says:

March 11, 2015 at 1:39 am

Could you be a bit more specific on the resistors? I searched on ebay and
found “10 Meg Ohm Bleed Resistors for Tesla Coil Capacitors” and I also
found “10 meg ohm 2 watt Carbon Composition Resistor” There are references
to .5 watt and .25 watt as well. Any recommendations? Do you sell these
units pre-assembled?

Reply
TheAdminFromHell says:

April 12, 2015 at 12:26 am

I need that for my penis..

Reply
SweetandSassy ;-D says:

October 16, 2015 at 7:47 pm

What is the tube with the ball in it? I am going to try this, I always get
an electric shock when getting in and out of my vehicle, opening my garage
and even at the grocery store pushing the carts. I am very sensitive to the
shock!

Reply
candido gonzalez says:

November 6, 2015 at 6:23 pm

What kind of wire were you using?

Reply
Marc Zinnoegger says:

December 22, 2015 at 6:00 am

How would I wire this with an LED in it to act as an indicator?

Reply
Mateus Machado says:

January 22, 2016 at 9:10 pm

Thanks for sharing this!

Reply
Rayaan Sattar says:

March 14, 2016 at 12:20 pm

can we use any resistor

Reply
Gor O says:

March 14, 2016 at 7:17 pm

great

Reply
cybersoil100 says:

April 27, 2016 at 7:52 am

Thanks for the video, Thomas. I’m always putting plastic wrap in the trash
and it’s always sticking to other plastic wrap. Can I use more than 2 (10
Mega Ohm) resistors? Also, what is that thing holding the little ball
jumping around and do we need it? How do you make that? Thanks, I’m
thinking your little invention will solve my problem. I will be looking
forward to your reply.

Reply
22Brat22 says:

May 21, 2016 at 11:10 am

How many OHM resistor did you use?

Reply
Rudzani Raedani says:

October 13, 2016 at 11:57 am

Cool stuff

Reply
BeastX KingV says:

November 6, 2016 at 7:24 pm

I need this I’m scared of statics

Reply

Leave a Reply Cancel reply